High Density Panel Display Series
more and more stable, more and more high definition

High density panel display, in the form of integrated 3in1 encapsulation, 
broke through the limitations of traditional LED display encapsulation methods and achieved higher pixel density. 
It adopts SPC (Solid Phase Crystallization) under the condition of normal temperature, 
aluminum wire ultrasonic welding and non-reflow soldering to avoid thermal damage effectively. 



Compression resistance, higher stability, good heat dissipation, wide viewing angle, energy efficient 


Pixel Pitch (mm)
1.25
1.5
1.875
2.5
Pixel Setting
RGB LED COB
Pixel Density (pixel/㎡)
640000
444444
284444
160000
Cabinet Resolution (pixel)
384*384
320*320
256*256
192*192
Cabinet Size (mm)
480*480
Cabinet Material
Die-casting Aluminum
Cabinet Weight (kg/pcs)
7
7
7
6.5
Contrast Ratio
6000 : 1
Brightness (cd/㎡)
≥600 (calibrated@9300K)
Brightness Adjustment
manually, automatically or remotely
Color Temperature (K)
3000~10000 (adjustable)

Viewing Angle  (°)

175 / 175
Power Consumption (W/㎡)
Max 600 / Avg 200
Applications

command and control center, conference center, radio and television, transportation fields, high-end and luxury, etc.
Others

Support on-site dot by dot calibration;

Support on-line signal dual direction backup;

Available for different signal format: AV, S-Video, VGA, DVI, HDMI, SDI, DP, etc;

Parameters can be customized.





High Stability
This series is more stable than traditional SMD ones. 
Since the LED lamp of high density panel display do not require the reflow soldering, 
it largely avoided the damage ratio of the lamp holder and epoxy gap during the high temperature soldering, 
greatly reduced the dead pixel ratio after delivery. 
The unique encapsulation method is very helpful to protect the LED lamp, and increase the resistance.



Malfunction dot rate
High density panel display
Normal led display
1/400000
3/100000




Moisture proof, Dust proof, Anti-Striking, Anti-static 
It adopts a completely new technology, with unique features for 
moisture-proof, Dust-proof, Anti-Striking, IP grade in the front can reach IP54. Flat LED surface with no gap.
You can wipe away the dust and water spots from the LED surface directly, easy for cleaning and maintenance.






Fast Heat Dissipation
This kind of LED chip was encapsulated directly on the PCB board, 
the heat can dissipate through the PCB board and aluminum plate over the cabinet. 
It realizes the mode of heat dissipation from a point to a surface, 
makes the heat dissipation more faster and heat conduction efficiency much higher. 
It effectively weakens light attenuation of LED chip, and prolongs the life span of the LED display.







High Gray Scale Display Control Technology
Adopting PWM gray-scale control technology, high density panel display can achieve 
high performance in gray scale and a high quality view with dedicated, rich and layered color.






Wide Viewing Angle and Perfect Display
With unique perspective technology and 175 degrees from top to bottom and left to right viewing angle, 
the picture is complete, more impact and no color difference.
The high-filled factor optical design of high density panel display changes the “Point light source” to the “surface light source”, 
eliminating the granular sense of the traditional SMD and greatly weakening the Moire pattern. 
Matte coating technology of high density panel display significantly improves the contrast ratio and reduces glare and harsh sense, 
so it is not easy to cause visual fatigue and can be watched closely and long time.






Seamless Splice, Perfect Image
LED display breaks the dimension limitation, which can be spliced at any dimension and any direction.
And this series is suitable for command and control center, conference center, radio and television, transportation fields, high-end and luxury, etc.


▲ The above simulated pic is for your reference only.